Best answer: Where is end condition in Solidworks?

In the PropertyManager, change the End Condition to the desired settings. Under Configurations, select the configurations to which you want the new end condition to apply: This configuration, All configurations, or Specify configurations. Click . The end condition is applied to the selected configurations.

What is End condition in Solidworks?

The Type determines how far the feature extends. Blind. Extends the feature from the sketch plane for a specified distance. Through All.

What is through all in Solidworks?

Through All. Extends the feature from the sketch plane through all existing geometry. Through All – Both. Extends the feature from the sketch plane through all existing geometry for Direction 1 and Direction 2.

How do you extrude a plane in Solidworks?

Extruding Surfaces from a 2D or 3D Face

  1. Click Insert > Surface > Extrude.
  2. Select a face: …
  3. Select other faces to define the extrude as required. …
  4. Select the end condition.
  5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .
IT IS INTERESTING:  Do rhinos have feelings?

What type of arc can be transitioned to directly from sketching a line?

You can transition from sketching a line to sketching a tangent arc without selecting the Tangent Arc tool by autotransitioning .

How do you use extruded cuts?

Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. For a solid loft, the first and last profiles must be model faces or faces created by split lines, planar profiles, or surfaces. …

What is fillet in Solidworks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops. Creating Fillets. Fillet PropertyManager. Use the Fillet PropertyManager to control options for fillet features.

Where is surface Extrude in SolidWorks?

Click Insert > Surface > Extrude. Select a face: To extrude from a 3D face, select a 3D face.

How do you Extrude a plane?

To perform a quick extrusion:

  1. Select your object and tab into Edit mode.
  2. Select the vertices, edges, or faces you want to extrude.
  3. Ctrl+left-click where you’d like the extrusion to end. Blender automatically decides what kind of extrusion you want and extrudes your selection right where you’d like.
IT IS INTERESTING:  Your question: How can I make money with SolidWorks?

How do you Extrude an object in SolidWorks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.

How do I convert an arc to a line in Solidworks?

To autotransition between line and arc:

  1. Click Line (Sketch toolbar) or click Tools, Sketch Entities, Line and sketch a line.
  2. Click the endpoint of the line, then move the pointer away. …
  3. Move the pointer back to the endpoint, then away again. …
  4. Click to place the arc.
  5. Move the pointer away from the arc endpoint.

What features were used to create the chisel?

What features were used to create the chisel? Loft and flex.

Can the extruded boss feature be used to remove material?

There is no need to add any dimension to set the dimensional value. The Extruded Boss feature can be used to remove material. … Instead of drawing an arc on an edge of a part with the intention of making a rounded cut (draw arc on part, smart dimension the sides, extrude cut), you could use this shortcut instead.