How do I edit a parasolid in Solidworks?

Can I edit a step file?

If you want to make changes to the . STEP file, you still can, even if you’ve used 3D Interconnect, but there are some extra steps involved. … STEP file without using 3D Interconnect. So if you’ve found that you can’t edit .

How do I edit a step file in SolidWorks?

You need to add a feature to the imported body.

  1. Select the bottom face of the imported body.
  2. Click Chamfer . …
  3. Under Chamfer Parameters, make the desired settings and click OK . …
  4. Right-click Imported1 in the FeatureManager design tree and select Edit Feature. …
  5. Click OK. …
  6. Select the STEP file and click Open.

How do I edit a part in SolidWorks?

To edit a part while in an assembly:

  1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
  2. Make the necessary changes to the part.

How do I open a STEP file in Solidworks?

To open STEP, IGES, and ACIS files in SOLIDWORKS:

  1. Click Open (Standard toolbar) or File > Open.
  2. In the dialog box, in Files of type, select the desired file format: STEP AP203/214/242 (*. …
  3. In the dialog box, browse to the desired file.
  4. Click Options.
  5. In the System Options dialog box, set options including: …
  6. Click OK.
IT IS INTERESTING:  Best answer: How do I merge two tables in Solidworks?

How do I convert Assembly to step in Solidworks?

You can set the export options when you export SOLIDWORKS part or assembly documents as STEP files. To set the STEP export options: Click File > Save As. Select a STEP file type for Save as type, then click Options.

Can you edit a solid body in Solidworks?

You can edit only features that were created from an ACIS, Autodesk Inventor, IGES, Parasolid, Pro/ENGINEER, Solid Edge, STEP, VDAFS, or VRML file.

How do I enable direct editing in Solidworks?

To do this, right click on an existing tab, go to the “tabs” fly-out menu and make sure “Direct Editing” is checked. If you are using SolidWorks 2019 or an earlier version, simply right-click on a tab and make sure “Direct Editing” is checked.

How do you convert an imported surface to a solid in Solidworks?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

How do I cut part of a Solidworks assembly?

To create an assembly feature cut:

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you cut intersecting parts in Solidworks?

To intersect or merge bodies:

  1. With the part open, click Insert > Features > Intersect .
  2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
  3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
  4. Click Intersect. …
  5. Select regions to exclude. …
  6. Select options as required: …
  7. Click .
IT IS INTERESTING:  Question: How do you hide a layer in Autocad Revit?

How do you cut a part in assembly in Solidworks?

1 Answer

  1. In the assembly, click Edit Component for the part to be cut.
  2. Insert – Feature – Cavity.
  3. Select the part that you wish to do the cutting with.
  4. Hide the cutting tool if necessary. You can’t suppress or delete it, as the cavity feature is referencing it.