How do I get rid of lines on top of each other in AutoCAD?

Select objects in a drawing (use CTRL-A to select everything) and then type OVERKILL on the command line. Click OK on the Delete Duplicate Objects dialog window, adjusting settings as desired (the default options are usually sufficient). Overkill deletes information that is overlaying other items.

Why are there lines all over my AutoCAD drawing?

Solution: On the command line in AutoCAD, type LINESMOOTHING and set it to Off (0). You can also enter the GRAPHICSCONFIG command and disable the “Smooth line display” checkbox. Turning off hardware acceleration completely can also prevent unwanted linework from showing.

How do I fix overlapping text in AutoCAD?

Solution:

  1. Open the files on a working system in AutoCAD.
  2. Type ETRANSMIT and press Enter.
  3. In the Create Transmittal window, click Transmittal Setups.
  4. Click Modify.
  5. Select Include fonts.
  6. Click OK, Close, and OK. …
  7. Transfer the archive as required and extract it.
  8. Install the fonts contained in the Fonts folder.

Where are overlapping lines in AutoCAD?

At the command line, type DS (Drafting Settings) and press Enter. In the Drafting Settings dialog box, click the Selection Cycling tab. Select “Allow selection cycling” and click OK.

How do you flatten multiple lines in AutoCAD?

To flatten a drawing automatically in AutoCAD:

Use the FLATTEN command to change the Z values of all lines, arcs, and polylines to 0. Turn off or freeze any hatch layers with hatch patterns so they are not included in the selection. Type FLATTEN at the command line. Select all objects and press the Enter key.

IT IS INTERESTING:  What is CAD and how is it used?

How do I delete unnecessary lines in AutoCAD?

Disable Smooth Line Display. On the command line in AutoCAD, type LINESMOOTHING and set it to Off or 0 (zero).

How do I turn off selection cycling in Autocad?

To turn on/off the selection cycling from the command line:

  1. At the command prompt, enter SELECTIONCYCLING and press Enter.
  2. Enter 2 to turn on the selection cycling display window / Enter 0 to turn it off.

How do I change the elevation in AutoCAD?

To Change the Location of an Elevation Line

  1. Double-click the elevation line you want to relocate.
  2. On the Properties palette, expand Basic Location.
  3. Click Additional Information.
  4. Specify the location of the elevation line: If you want to… Then… relocate the elevation line. …
  5. Click OK.

How do I flatten a DWG file?

Making sure you’re in your top down view and select everything in your drawing (Ctrl+A). With everything selected use the command “FLATTEN”. This will Flatten your drawing removing any Z axis values. FLATTEN is a very useful command and is quick to use.