How do I use mates in Solidworks?

How do you merge two surfaces in Solidworks?

Simply hold down Ctrl and select the two entities you wish to mate. The supported mate types are all standard mates (Concentric, Coincident, Equal, etc), as well as some advanced mates (Profile Center, Symmetric and Width) and some mechanical mates (Cam and Slot).

How do I mate a part in Solidworks?

You can also apply mates:

  1. While inserting a body into a part, by selecting Locate part with Move/Copy feature in the Insert Part PropertyManager.
  2. After the body is already in the part, using Move/Copy Bodies (Features toolbar).

How do you fix mates in Solidworks?

Try these actions, which sometimes fix the problem:

  1. Drag a component to snap it into place.
  2. Suppress and unsuppress the affected mates.
  3. If the components are far from their correct positions, suppress some of their mates, move the components closer to their correct positions, then unsuppress the mates.

What standard mates are used in Solidworks?

Standard mates include angle, coincident, concentric, distance, lock, parallel, perpendicular, and tangent mates. You can add an angle mate between the combinations shown below.

How do you make mechanical mates in Solidworks?

In SOLIDWORKS, creating this mate is done by simply selecting the closed loop of tangent faces that define the cam and the face or point on the follower that will be in contact with the cam.

IT IS INTERESTING:  Question: What do you call a person who is an architect?

How do I edit a mate in Solidworks?

To modify a mate:

  1. Expand the Mates folder in the FeatureManager design tree. …
  2. In the PropertyManager, select the mate to edit and change the options. …
  3. To replace one entity with another, click the entity to replace in the Mate Selections box, press Delete, then select the new entity.
  4. Click .