How do I use the slot in Catia v5?

How do I use the Slot tool in Catia?

Open the Slot. CATPart document. Click Slot . The Slot Definition dialog box is displayed.

Center Curves

  1. 3D center curves must be continuous in tangency.
  2. if the center curve is planar, it can be discontinuous in tangency.
  3. center curves must not be composed of several geometric elements.

What is slot Catia?

To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction. To create slots you can combine the different elements as follows: Open profile. Closed profile. Pulling direction.

How do you create a cylinder in Catia v5?

Creating Cylindrical Surfaces

  1. Click Cylinder . …
  2. Select the Point that gives the center of the circle to be extruded and specify the desired Direction of the cylinder axis. …
  3. Select the Radius of the cylinder.
  4. Enter values or use the graphic manipulators to define the start and end limits of the extrusion.

How do I Section A section in Catia?

Creating 3D Section Cuts

  1. Select Insert > Sectioning from the menu bar, or click Sectioning in the DMU Space Analysis toolbar and create a section plane. …
  2. In the Definition tab, click Volume Cut to obtain a section cut:

How do I start my own part in Catia?

1 Opening a New CATPart Document.

click the New icon). The New dialog box is displayed, allowing you to choose the type of document you need. Select Part in the List of Types field and click OK. The Part Design workbench is loaded and a CATPart document opens.

IT IS INTERESTING:  Quick Answer: How many GB is Revit?

What does the F1 button do in Catia V5?

General (36 shortcuts)

-1 Esc Exit the current dialog box (when there is one)
F1 Get contextual online help
3 ↑ Shift + F1 Get help on toolbar icons
2 ↑ Shift + F2 Toggle the specification tree overview on and off
-2 F3 Toggle specification tree display on and off

How do you make a hollow cylinder in Catia?


  1. Click Solid > Create > Create Sketch .
  2. Select the XZ plane to sketch on. …
  3. Click Sketch > Create > Center Diameter Circle .
  4. Hover over the origin (or center) of the sketch. …
  5. Click once to begin placing the circle.
  6. Drag the mouse away from the center to start sketching a circle. …
  7. Click again to complete the circle.