How do you cut a groove in SolidWorks?

How do you make a circlip groove in SolidWorks?

The Retaining Ring Grooves tab lets you select and create retaining ring grooves. To open this tab: Click Grooves (Toolbox toolbar) or Tools > Toolbox > Grooves. In the Grooves dialog box, click Retaining Ring Grooves.

How do you sweep cut in SolidWorks?

Swept Cut PropertyManager

  1. Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path. For a solid profile, open a part that has a tool body as the profile and a sketch path to follow.
  2. Click Swept Cut (Features toolbar).

How do you make a groove in SolidWorks 2017?

To create a groove:

  1. Select a cylindrical face on a part where you want to place the groove. …
  2. Click Grooves (Toolbox toolbar) or Toolbox > Grooves .
  3. In the Grooves dialog box: …
  4. Select a standard, groove type, and available groove size from the lists on the top left of the tab. …
  5. Click Create.
IT IS INTERESTING:  How do I restore AC$ file in AutoCAD?

How do you make a groove in Solidworks?

To create a groove:

  1. Select a cylindrical face on a part where you want to place the groove. …
  2. Click Grooves (Toolbox toolbar) or Toolbox > Grooves .
  3. In the Grooves dialog box: …
  4. Select a standard, groove type, and available groove size from the lists on the top left of the tab. …
  5. Click Create.

How deep should an O-ring groove be?

Cross Section & Groove Design Data

Available Cross Sections for Encapsulated O-Rings & Groove Design Data
Inch MM Groove Depth
.063±.004 1.60±0.10 .046
.070±.004 1.78±0.10 .049
.079±.004 2.00±0.10 .057

How do you size an O-ring hole?

How to Measure O-Rings

  1. Place the O-ring on a clean, flat, level surface.
  2. Determine the inside diameter by using a ruler to measure from one inner edge to another.
  3. Use a ruler to measure the diameter, from one outer corner of the O-ring to the other outer corner.
  4. Finally, measure the cross-section.

How do you cut an O ring groove in SolidWorks?

To create an O-ring groove, click the O-Ring Grooves tab.

Creating Grooves

  1. In the FeatureManager design tree, expand the groove feature.
  2. Right-click the sketch under the feature and select Edit Sketch. The sketch opens for editing. …
  3. Add dimensions and relations to the sketch to define its position.
  4. Exit the sketch.

How do you trim entities?

Trimming with Power Trim

  1. Right-click the sketch and select Edit Sketch.
  2. Click Trim Entities. …
  3. In the PropertyManager, under Options, select Power trim .
  4. Click in the graphics area next to the first entity, and drag across the sketch entity to trim.
IT IS INTERESTING:  Frequent question: How do I rotate a section plane in SketchUp?

How do you do revolve cut in SolidWorks?

Tutorial – How to use the Revolved Cut in SolidWorks

  1. Open SolidWorks and start a new part file.
  2. First open a sketch on the front plane by right clicking on the front plane and selecting the sketch symbol.

How do you make a lip and groove in SolidWorks?

Create a lip or groove fastening feature by clicking Lip/Groove (Fastening Features toolbar) or Insert > Fastening Feature > Lip/Groove.

What is Toolbox in SolidWorks?

The Toolbox is a collection of several powerful tools built into SolidWorks; it can increase productivity and decrease the time required to complete a design. The Toolbox contains a vast library of standard hardware components that can easily be dropped into a design at any point.

How do I use the wrap feature in SolidWorks?

Wrap

  1. Select the sketch you want to wrap from the FeatureManager design tree. …
  2. Click Wrap on the Features toolbar, or click Insert > Features > Wrap.
  3. In the PropertyManager, under Wrap Type: …
  4. If you select Emboss or Deboss , you can select a line, linear edge, or plane to set a Pull Direction . …
  5. Click OK .