**Contents**show

## How do you draw a tangent line between two lines in AutoCAD?

Click Home tab Draw panel Curves drop-down Create Curves Between Two Lines Find.

…

Enter one of the following options to define the curve:

- Enter Length, or L, and then enter the length or pick the distance in the drawing.
- Enter Tangent, or T, and then enter the tangent length or pick the distance in the drawing.

## How do you draw a tangent line in AutoCAD?

Shift + right-click to bring up the OSNAP shortcut menu. Click on Tangent. Select a target object. Alternatively, for some command, once initiated and placement location is requested, type TAN in the command line and press enter.

## How do you draw two lines at the same time in AutoCAD?

To Draw Double Line Segments

- Click Draw menu Double Line.
- Specify the start point (1).
- Specify the endpoint (2).
- Continue specifying points as needed. If you want to remove the previously specified point, enter U or -u at the Command prompt.
- To connect the start point with the endpoint, enter cL (Close).

## How do you draw a tangent line in AutoCAD 2020?

To Create Lines Tangent to a Specified Point

- Click Home tab Draw panel Line drop-down Create Line Tangent From Point Find.
- Select the arc or line object to extend the line from.
- Specify the point of tangency on the object.
- Specify a distance by either clicking in the drawing or entering a distance.

## What are perpendicular lines?

Perpendicular lines are lines that intersect at a right (90 degrees) angle.

## How do you draw a tangent line in AutoCAD 2021?

Choose Keypoint Curve Tools > Line Tangent & Perp > Line Tangent to Curve . Click the start point of the tangent line. Click the curve you want the line to be tangent to. The Line Tangent to Curve tool calculates the end point for the line to be tangent to that curve.