How do you edit a roof profile in Revit?

How do you change roof points in Revit?

Modify the Shape of a Roof or Structural Floor

  1. Select the floor or roof to modify.
  2. Click Modify | Floors tab Shape Editing panel Modify Sub Elements. …
  3. Drag a point or edge to modify the location or elevation. …
  4. Click the text control to enter a precise height value for the selected point or edge.

How do you edit a roof extrusion in Revit?

Create a Roof by Extrusion

  1. Display an elevation, 3D, or section view.
  2. Click Architecture tab Build panel Roof drop-down (Roof by Extrusion).
  3. Specify the work plane.
  4. In the Roof Reference Level and Offset dialog, select a value for Level. …
  5. To raise or lower the roof from the reference level, specify a value for Offset.

How do you change the pitch on a roof?

Use prefabricated trusses to put a new pitch on the roof. Give the width and length of the roof and a chosen pitch to a truss supplier to build trusses to order. Use at least a 6/12 pitch, rising 6 inches per foot of slope, to provide attic storage; get special attic roof trusses to make a room inside the new roof.

IT IS INTERESTING:  How do you mark a level in Revit?

How do I make a hip roof in Revit?

To model a Roof by Footprint in Revit undertake the following steps:

  1. Go to your desired Plan View to begin modelling you roof. …
  2. Architecture Tab → Roof (Dropdown) → Roof by Footprint.
  3. Use the draw tools panel (Sketch, Pick Lines or Pick Walls) to create your desired roof footprint.
  4. Note Boundaries show an “Angle” symbol.

How do you cut a roof in Revit?

Choose “Void extrusion” to create an In-place family roof. Pick the line on the base of the inside edge of the roof to draw the void in a section view. The “cut geometry” command can be used to select the roof over the void. To execute the cut, click “Finish” after that.

How do I edit a floor in Revit?

Edit a Floor Sketch

  1. In a plan view, double-click the floor, or select the floor and click Modify | Floors tab Mode panel Edit Boundary. Watch the tooltip and the status bar to be sure you select the floor, not another element. …
  2. Use sketching tools to change the boundaries of the floor.
  3. Click Finish Edit Mode.

How do you make a roof face in Revit?

Introduction

  1. Click Massing & Site tab > Model by Face panel > (Roof by Face).
  2. In the Type Selector, select a roof type.
  3. Move the cursor to highlight a face.
  4. Click to select a face.
  5. In the contextual part of the ribbon select create roof.

What is roof extrusion?

The Roof by Extrusion tool creates a roof by extruding a profile that you sketch. This is a handy tool when the roof you are trying to create cannot be defined simply by sloping the roof up from an edge, such as when the cross-section of the roof is curved.

IT IS INTERESTING:  How do you fill in spaces in SketchUp?

How do you make a complex roof in Revit?

Tag: Complex Roof in Revit

  1. Go to your desired Plan View to begin modelling you roof. …
  2. Architecture Tab → Roof (Dropdown) → Roof by Footprint.
  3. Use the draw tools panel (Sketch, Pick Lines or Pick Walls) to create your desired roof footprint.
  4. Note Boundaries show an “Angle” symbol.

What is ridge on roof?

Roof Ridge: The roof ridge, or ridge of a roof is the horizontal line running the length of the roof where the two roof planes meet. This intersection creates the highest point on a roof, sometimes referred to as the peak. Hip and ridge shingles are specifically designed for this part of a roof.