How do you Extrude a feature in SolidWorks?

How do you extrude an object in Solidworks?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.

What is extrude feature?

About the Extrude Feature. Extrusion is a method of defining three-dimensional geometry by translating a two-dimensional sketch normal to the sketch plane, for a pre-defined distance or up to a specified reference. Use the Extrude tool to create a solid or surface feature, and to add or remove material.

Why can I not extrude in Solidworks?

Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.

IT IS INTERESTING:  Question: How do you fillet edges in AutoCAD 2D?

What does the cut extrude feature do in Solidworks?

The Cut-Extrude feature will then preview the shape of cut based on the selected sketch. The Cut-Extrude feature button will prompt you to set parameters in the menu shown in Figure 6.

What is extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

How do you extrude an assembly in Solidworks?

Creating Extruded or Revolved Cuts as Assembly Features

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you Extrude a surface on shape?

Use Extrude to create parts or surfaces.

From the Sketch or Feature toolbar:

  1. Click .
  2. Select Surface Creation type:
  3. Select a Result operation type: …
  4. Select sketch curves to extrude.
  5. Select End type: …
  6. Specify whether to switch to the opposite direction, optional, .

How do you show Extrude dimensions in Solidworks?

In your FeatureManager Tree, right-click on the Annotations folder and select Show Feature Dimensions. This will make all the dimensions from the features appear around the part in the design space.

What is the Extrude command used for?

The Extrude command in AutoCAD 3D is used to create a surface or solid of a 2D surface or a 3D curve. The Extrude command is widely used to create walls, shapes, etc.

IT IS INTERESTING:  How do you shift a selection in AutoCAD?

How do you do cut extrude in Solidworks?

Creating Extruded or Revolved Cuts as Assembly Features

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.

Why is extrude cut greyed out?

It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.

How do you remove extrude in Solidworks?

Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces. The green area is the face defining the extrude. The resulting model is hollow where the face was deleted.

What is extrude cut?

You create an extruded cut in a two-dimensional or axisymmetric planar part by sketching the two-dimensional cross-section of the cut directly on the plane of the part. The cut always passes completely through the part.

What is extruded boss in Solidworks?

Oysu. Chapter 3 Extruded Boss and Cut. Extrude tool is used to extend a sketched profile in one or two directions as either a thin feature or a solid feature. An extrude operation can either add material to a part (in a base or boss) or remove material from a part. 3.1 Extruded Boss.

IT IS INTERESTING:  Your question: How do I fix Autodesk installation error 1603?

How do you get rid of Boss Extrude in Solidworks?

This is useful in working with multibody parts with multiple configurations. To use Delete/Keep Body: Click Delete/Keep Solid/Surface on the Features toolbar, or click Insert > Features > Delete/Keep Body. In the PropertyManager, select Delete Bodies or Keep Bodies.