How do you fillet a rectangle in Solidworks?

How do you fillet a box in SolidWorks?

To create fillets:

  1. Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round.
  2. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners.
  3. Click OK .

How do you round the edges of a rectangle in SolidWorks?

In order to round off the corner edges of the rectangle use the Fillet tool also found on the feature tab.

  1. Click on the fillet tool.
  2. Select the corner edges you want to round off.
  3. Define the radius of the fillet (0.25 in)
  4. Click the green check mark.

How do I make a filet in SolidWorks?

To create a fillet: Click Fillet (Features toolbar) or Insert > Features > Fillet/Round. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners.

What is fillet command in Solidworks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.

How do you cut edges in Solidworks?

To create a corner-trim:

  1. Create a sheet metal part.
  2. Click Corner-Trim. (Sheet Metal toolbar) or click Insert > Sheet Metal > Corner Trim.
  3. In the Corner-Trim PropertyManager, set the following under Relief Options: Select edges for Corner edges . Click Collect all corners. Select a value for Relief Type. …
  4. Click .
IT IS INTERESTING:  How do I change the Origin coordinate system in Solidworks?

Why is my fillet not working SolidWorks?

You get this error because you have two perpendicular lines, and the sketch fillet radius you try to apply is equal to the length of one of the lines. It means that it should delete one of the lines and this way replace two lines with a line and an arc. Sketch fillet simply cannot do that.

How do you dimension a Fillet?

You can automatically dimension the fillet when you fillet a corner.

  1. Click Home tab Modify panel Fillet. …
  2. On the ribbon, in the Fillet Options panel, check the fillet size. …
  3. Select Fillet Options panel Insert Dimension. …
  4. Click an empty space in the drawing area.

How do drawings show fillets?

Double-click the drawing background to display the General arrangement drawing properties dialog box. Click Part or Pour object. If you need to change part representation for profiles, select Exact from the Part representation list. Under Additional marks, select the Fillet edges on/off check box.

What is the difference between a Fillet and a chamfer?

What is the difference between Fillet and Chamfer? The basic one-liner answer for this question is Fillets is the round corner of parts either outside or inside edges. … On the other hand, the chamfer is the sloped/angled corner or edges.