How to make things equidistant in SOLIDWORKS?

How do you scale down a sketch in Solidworks?

To scale a sketch:

  1. In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify.
  2. In the dialog box, under Scale About, select one of the following: Option. Description. Sketch origin. …
  3. Type a value for Factor, and press Enter. You cannot scale a sketch that has external references.
  4. Click Close.

How do you scale a line in Solidworks?

(Sketch toolbar) or Tools > Sketch Tools > Scale. In the PropertyManager, under Entities to Scale, select sketch entities for Sketch item or annotations. , and then click in the graphics area to set the point to Scale about.

How do you drag a point in Solidworks?

Do one of the following:

  1. Select From/To, click Start point to set a Base point , and then drag to position the sketch entities.
  2. Select X/Y and set values for Delta X and Delta Y to position the sketch entities.

How do I add a fillet in Solidworks?

To create fillets:

  1. Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round.
  2. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners.
  3. Click OK .
IT IS INTERESTING:  What color plots white in AutoCAD?

How do you cut a circle in Solidworks?

Trim Away Outside

  1. Right-click the sketch and select Edit Sketch.
  2. Click Trim Entities on the Sketch toolbar, or click Tools, Sketch Tools, Trim.
  3. In the PropertyManager, under Options, select Trim away outside .
  4. Select two bounding sketch entities.
  5. Select the sketch entities to trim.
  6. Click OK .

Can you scale a Solidworks drawing?

You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.

Can you scale a sketch solidworks?

(Sketch toolbar) or Tools > Sketch Tools > Scale. In the PropertyManager, under Entities to Scale, select sketch entities for Sketch item or annotations. , and then click in the graphics area to set the point to Scale about.

How do you make things bigger in Solidworks?

Scaling a Part

  1. In a part document, click Scale (Features toolbar) or Insert > Features > Scale .
  2. Set options in the PropertyManager.
  3. Click. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you use property managers in Solidworks?

The PropertyManager appears on the PropertyManager tab in the panel to the left of the graphics area. It opens when you select entities or commands defined in the PropertyManager. You can choose whether it opens in other cases in Tools > Options > System Options > General .

IT IS INTERESTING:  How do you move points in AutoCAD?

How do I create a custom scale in Solidworks?

To set custom scales for drawing views:

  1. In a drawing, select an existing view or insert a new view.
  2. In the PropertyManager, under Scale, select Use custom scale.
  3. In the box, enter a scale in the format x:x or x/x . You can also click and select a predefined scale from the list.

How do you drag and drop in Solidworks?

The cousin of copy and paste is drag and drop. The key is that you must press and hold the key as you drag. In this example, as we hold the key, we can click on a fillet within the assembly and drop it on a different edge in the same assembly to get a new fillet.

How do you move things in Solidworks?

To move, copy, rotate, or mate a solid or surface body:

  1. Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy . …
  2. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.
  3. Set options in the PropertyManager.

How do you make a block in Solidworks?

Making Blocks

  1. Create a sketch.
  2. Click Make Block. (Blocks toolbar) or Tools > Block > Make . …
  3. Select the sketch entities you want to make as a block for Block Entities.
  4. Click .
  5. Repeat steps 2-4 for each of the remaining sketch entities.
  6. With the sketch in edit mode, add the necessary relations.
  7. Save the part.