What is the function of trim entities in SolidWorks?

Extends or trims two sketch entities until they intersect at a virtual corner. Trims open sketch entities that lie inside two bounding entities. Trims open sketch entities outside of two bounding entities. You can use the Trim PropertyManager to select a trim type and control other trimming options.

What is the use of trim entities *?

The Trim Entities tool is mainly used for removing unwanted parts or portions from your design sketch.

How do I use the trim function in SolidWorks?

To trim with the Power trim option: Right-click the sketch and select Edit Sketch. (Sketch toolbar) or Tools > Sketch Tools > Trim. Click in the graphics area next to the first entity, and drag across the sketch entity to trim.

Where are trim entities SolidWorks?

To trim with the Power trim option: Right-click the sketch and select Edit Sketch. (Sketch toolbar) or Tools > Sketch Tools > Trim. Click in the graphics area next to the first entity, and drag across the sketch entity to trim.

IT IS INTERESTING:  Your question: How do architects use SketchUp?

How many types of trim are in SolidWorks?

You can use any of the following trim options: Power trim. Corner. Trim away inside.

How do you offset entities in Solidworks?

To create a sketch offset:

  1. In an open sketch, select one or more sketch entities, a model face, or a model edge.
  2. Click Offset Entities. (Sketch toolbar) or Tools > Sketch Tools > Offset Entities.
  3. Set the properties in the Offset Entities PropertyManager. …
  4. Click.

How do you cut corners in Solidworks?

To create a corner-trim:

  1. Create a sheet metal part.
  2. Click Corner-Trim. (Sheet Metal toolbar) or click Insert > Sheet Metal > Corner Trim.
  3. In the Corner-Trim PropertyManager, set the following under Relief Options: Select edges for Corner edges . Click Collect all corners. Select a value for Relief Type. …
  4. Click .

How do you trim a 3D object in SolidWorks?

To trim a 3D sketch:

  1. Start the 3D sketch on a 2D plane.
  2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

How do you trim an intersecting body in SolidWorks?

Intersecting Bodies to Modify Part Geometry

  1. With the part open, click Insert > Features > Intersect .
  2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
  3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
  4. Click Intersect. …
  5. Select regions to exclude. …
  6. Select options as required:

How do I convert entities in SolidWorks?

To convert an entity:

  1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
  2. Click Convert Entities. …
  3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
  4. Click .
IT IS INTERESTING:  How do I cut a surface in AutoCAD?

How do you cut a sketch in SolidWorks?

To cut a feature:

  1. Edit a sketch.
  2. Select the sketch entities required for the feature. …
  3. Hold Ctrl and select a face to be the starting point for the cut.
  4. Click Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.

How do you make a circular pattern in Solidworks?

To create circular sketch patterns: In an open sketch, click Circular Sketch Pattern (Sketch toolbar) or Tools > Sketch Tools > Circular Pattern. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .

How do you revolve boss bases in Solidworks?

Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.

How do you extend a line in Solidworks?

on the Sketch toolbar, or click Tools > Sketch Tools > Extend. Move the pointer over the sketch entity to extend. A preview appears in the direction to extend the entity. If the preview extends in the wrong direction, move the pointer to the other half of the line or arc.