When adding notes Hole callouts center marks and centerlines for a Solidworks drawing which tab do you use?

On the Document Properties tab, under Drafting Standard, click Centerlines/Center Marks. Specify the drawing document properties for Center marks, Slot center marks, and the Center mark layer.

How do you add a hole in a callout in SolidWorks?

To add a hole callout:

  1. Click Hole Callout (Annotation toolbar), or click Insert > Annotations > Hole Callout. …
  2. Click the edge of a hole, then click in the graphics area to place the hole callout. …
  3. Edit the callout in the Dimension PropertyManager. …
  4. Repeat steps 2 through 4 to insert additional hole callouts, then click .

How do I center a hole in SolidWorks?

To insert center marks automatically:

  1. Click Center Mark. (Annotation toolbar) or Insert > Annotations > Center Mark. …
  2. Under Auto Insert, select one or more: For all holes. …
  3. Set the options for the auto insert choices.
  4. Set the remaining options in the Center Mark PropertyManager.
  5. Select one or more drawing views.
  6. Click .

How do you show centerlines in SolidWorks drawings?

Centerline Annotations

  1. In a drawing document, click Options , Document Properties, Detailing.
  2. Under Auto insert on view creation, select Centerlines.
  3. Click OK.
  4. Insert a drawing view. Centerlines appear automatically in all appropriate features.
IT IS INTERESTING:  What is the use of bounding box in Solidworks?

How do you center a slot in SolidWorks?

To place a center mark in a sketch:

  1. Click Center Mark (Annotations toolbar).
  2. Under Manual Insert Options, select Slot center mark.
  3. Select other options for the center mark type.
  4. In the graphics area, select an arc or curved edge of a slot and click .

How do I use the Hole tool in Solidworks?

To create and position a simple hole:

  1. Select a planar face on which to create the hole.
  2. Click Simple Hole (Features toolbar) or Insert > Features > Hole > Simple.
  3. In the PropertyManager, set the options.
  4. Click OK to create the simple hole.

What is Hole callout?

The Hole Callout tool adds driven diameter dimensions to holes created by the Hole Wizard or circular cut features. Best results are obtained by creating holes using the Hole Wizard. Hole callouts are available in drawings. If you change a hole dimension in the model, the callout updates automatically.

What is a center mark in Solidworks?

Center marks are annotations that mark circle or arc centers and describe the geometry size on the drawing. With the Center Mark tool, you can create a center mark or a center point on circular edges. The center mark lines can be used as references for dimensioning.

Where are center lines used in drawings?

Centerlines are used as a reference to dimension circular features. Whenever you want to dimension a circular feature, it is best to use its mid-point as a reference.

What is centerline in drawing?

Center lines denote a circular feature such as a shaft or a hole. A rectangular feature seen on an elevation of a drawing could be identified either as a circular feature or a rectangular feature. The center line is the method of quickly identifying the shape.

IT IS INTERESTING:  How do I add a design library in SOLIDWORKS?

How do you center a drawing?

Center shapes on the drawing page

  1. In the drawing, select a shape, or to select multiple shapes, do the following: Drag a selection net around all the shapes that you want to center. Hold down the SHIFT key and click all the shapes you want to center.
  2. On the Home tab, click Position > Align Center.

How do I center text in Solidworks?

After you sketch a centerline you can select it with the curve selection box. You can enter text in a box below the curve selection box. Your text will appear above the line. You can then select the center align option to center the text and click the green check to confirm the change.

How do I center my text in the center?

Center the text vertically between the top and bottom margins

  1. Select the text that you want to center.
  2. On the Layout or Page Layout tab, click the Dialog Box Launcher. …
  3. In the Vertical alignment box, click Center.
  4. In the Apply to box, click Selected text, and then click OK.