Quick Answer: How do you read house building plans?

What do the numbers on a House plan mean?

When reading the floor plans, you will probably notice a few circles with numbers and letters inside of them. These symbols are used to indicate a cross-section of that particular room or space that can be found elsewhere in the blueprints.

How do you read the size of a house?

Room dimensions are presented in width by the length. For example, a room that has a dimension of 12′ x 16′ means it’s 12 feet wide (from side to side) by 16 feet long (from top to bottom). Rooms aren’t always square, so make sure you understand fully how the room feels.

How do you read a door size for a house plan?

Door Schedule

For example a door may have a size of 2868 – the number alternates between feet and inches, first number is feet, second is inches, third is feet again and the last is inches. That makes that number 2′ 8″ x 6′ 8″. The first set of numbers, 2′ 8″ is the width, the second set, 6′ 8″ is the height.

How do you work out the square meters of a house plan?

If you want to determine how many square metres your house is, doing your calculations room by room will make this a much easier task. Measure the width, followed by the length, and then multiply these. Say your length is 3.9m and your width is 2.1m, your equation for the room will be 3.9m x 2.1m = 8.19m2.

IT IS INTERESTING:  You asked: What is generative design in architecture?

Do floor plans include closet space?

An actual construction floor plan will give you dimensions for walls, windows, closets, etc.

How do you read the slope of a site plan?

The slope is mapped out using contour lines. Each contour line follows land that’s the same elevation above sea level. You can see that the elevation of each contour is marked.

How do you reference a construction plan?

Reference list

  1. Creator, C. (date of creation). Title or description of blueprint [blueprint]. …
  2. Smith, E. (1912, November 7). …
  3. ⇒ APA treats blueprints like primary sources. Cite blueprints as you would archival materials.
  4. ⇒ If the location appears in the name of the archives/library, don’t repeat it in the location info.

How do you read a project plan?

4 Tips for Reading Blueprints

  1. Begin with the title block. The title block is the first piece of information you’ll see in construction site plans. …
  2. Study the plan legend. …
  3. Find the blueprint’s scale and orientation. …
  4. Look for notes from the architect.