How do I flatten a part in Solidworks?

Where is flatten in Solidworks?

To flatten a surface: In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. The Flatten PropertyManager displays. Select faces in the graphics area or from the FeatureManager design tree.

How do you curve a part in Solidworks?

To create a sketched bend feature:

  1. Sketch a line on a planar face of the sheet metal part. …
  2. Click Sketched Bend. …
  3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
  4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

Why is surface flatten greyed out?

The reason for the “Flatten” icon being greyed out was because the sheet metal part had a “Flat Pattern” annotation view and this annotation view was active. By selecting another annotation view, the “Flatten” icon then becomes available again.

How do I flatten a part in Solidworks 2021?

To flatten a surface:

  1. In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. …
  2. Select faces in the graphics area or from the FeatureManager design tree.
  3. Then select a vertex. …
  4. In the PropertyManager, click Relief Cuts.
IT IS INTERESTING:  How do I create a chamfer in SketchUp?

Can you flatten a surface in Solidworks?

The SOLIDWORKS software can flatten developable and non-developable surfaces and faces. … Non-developable surfaces and faces deform when flattened. You can select curves and sketches on the surface to flatten. You can also select curves, sketches, and edges on the surface to be relief cuts or split lines.

How do you make a flat pattern in Solidworks?

To create a flat pattern configuration:

  1. In a sheet metal part, create a new configuration.
  2. In the FeatureManager design tree, do one of the following: Right-click Flat-Pattern and select Unsuppress . Select Process-Bends and all of the features after it.

How do you flatten sheet metal in Solidworks?

To flatten a body, do one:

  1. In the FeatureManager design tree, select the part and click Flatten (Sheet Metal toolbar).
  2. In the cut list, right-click the body and click Flatten .
  3. In either the FeatureManager design tree or the cut list, right-click the Flat-Pattern feature for the part and click Unsuppress .

How do you flatten a loft in Solidworks?

Example – Flattening a Surface

  1. In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. …
  2. Select faces in the graphics area or from the FeatureManager design tree.
  3. Then select a vertex. …
  4. In the PropertyManager, click Relief Cuts.

How do you fold in Solidworks?

First, add an Unfold feature to flatten the bend. Next, add your cut. Lastly, add a Fold feature to return the bend to its folded state.

Unfold/Fold.

Original part One bend is unfolded
Cut through the unfolded bend Bend is folded back up
IT IS INTERESTING:  Best answer: Is CAD drafting a good career?

Can you bend parts in Solidworks?

The Bends PropertyManager allows you to convert a shelled part to a sheet metal part. To use the Bends PropertyManager to convert a part to sheet metal: Click Insert Bends (Sheet Metal toolbar) or click Insert > Sheet Metal > Bends.